 |
It
is intended for transportation of trains through underground
openings of mines and pits with dips up to 0,005 and radii
of curved rail tracks not less than 18 m, in which exploitation
of contact electric locomotives is permitted by acting safety
regulations. Electric locomotive is produced against Technical
conditions of Ukraine
35.2-25103132-007:2006.
|
| ¹ |
Name
of critical parameters and sizes |
Unit of measure
|
Values |
| 1. |
Adhesion mass, t |
kg |
10 000 |
2. |
Voltage rating on current collector |
V |
250 |
3. |
Speed by hourly regime |
km/h |
12,2 |
4. |
Capacity of electric motors in hourly regime |
kWt |
2õ33 |
5. |
Tractive effort in hourly regime |
kN |
25 |
| 6. |
Width of a gauge |
mm |
600,750,900 |
| 7. |
Length on buffers |
mm |
4920 |
| 8. |
Width on obtrusive parts for gauge 750
|
mm |
1350 |
| 9. |
Height on the driver’s cabin |
mm |
1650 |
| 10. |
Hard base |
mm |
1200 |
| 11. |
Clearance (road bay) |
mm |
90 |
12. |
External diameter of a bandage (band) |
mm |
680 |
13. |
Productivity of a compressor |
l/min |
460 |
14. |
Working pressure of the air in pneumosystem |
ÌPà |
0,45 |
Besides, in the principal electric diagram of contact mine electric
locomotive 10ÊÀ application of the following electric equipment
is presupposed
• Power controller ÊS304Ì
• Speedometer SR.00.000
• Electric motor DTN
• Uniform compressor U43 102À
|
• Block of resistors BR-1Ì
• Source of power supply IP-5
• Headlight FRE 1.1 Ì
|
|
